What's in YOUR prop box?

[Hatetocrash]

I had to rebuild the transom of the MG after a 57mph blowover.I haven't tried 5s since.Hence the paint job.I have a CC 1515 and a T-180.My favorite prop so far is the X645 though I now have a M645 to try.

I have wipped out at least 10 times at over 40mph and a couple at 50 with my surgecrusher with no damage at all..But one afternoon my kitty knocked it off the kitchen counter and the rudder struck the tile floor,so i had to do some major transome repair..lol...I since learned to not wipe out my boats at high speeds..lets face it we all know how to push it to far as well as hold back a little to prevent a wipe out...I believe my MC can handle 50 plus if i wipe out its because i will be asking for it...PS i'm pretty new to boats what is cc 1515? also what was the can size of your 2200kv...thanks

[srislash]

CC is Castle Creations and a 1515 is can size 40-75.It is the 1/8th scale car motor.It's kv is 2200 and it's wind is 1Y.

[Hatetocrash]

CC is Castle Creations and a 1515 is can size 40-75.It is the 1/8th scale car motor.It's kv is 2200 and it's wind is 1Y.

okay,yes i heard a few mc owner's using that motor...my setup today was fast as i want to go, around 50mph plus,but the hk 200 amp got verrrry hot as well as the 36-74-1900 turnigy on 5s,and cooling was working...i heard these esc's need to be taken appart and have some kind of cooling plate mod..i need to see if i can find the specific's on that... i probabely will end up get the seaking 180 if i can't fix this one,as it great on 5s pushing bigger props with not over heating...I may work on a good 4s setup,but i have a lot of 3s packs and only 2 2s.. maybe 5s is also to much voltage for the turnigy motor ..i think its rated for 5s i need to check...i know my 36-74-1700 tacon is rated up to 7s..i beleive tacon and leapard are same,but turnigy is not as heavy duty...Anyway back to the drawing board..thanks