Attaching flex cable too

[Riversidedan50]

needing to know how you guys attach a prop shaft to a flex cable solder or loctite if so which kind?

[oscarel]

Either will work, here's an article that might help.

https://www.offshoreelectrics.com/pr...=art-glue-flex

[fweasel]

I glue my cables into drilled stub shafts with Loctite 648. A proper fit and good surface preparation are key.

[lucassinner]

I’ve always had the best results silver soldering the flex cable to the prop shaft; it holds up great under load and never slips. Some guys use Loctite 638 or 680, but in my experience, soldering gives more peace of mind, especially with high-power setups.