Mini KEP's Rigger

[bhorowitz]

Daniel,
Sent you a PM back.
Bob

[aj34me]

Did you sell the mini Keps?

[bhorowitz]

AJ,
I didn't sell it, but I think I'm going to keep it.
Bob

[LeeU]

17.5" Keps

Hi,
Would like to introduce myself, Lee Underwood from ABQ NM. I'm working on a Neu 1105 2Y 2S powered Outrigger scaled down in Inventor to 17.5" from the Kep's T3-21 V2 with the updated sponsons. It has been a lot of work but getting really close to sending it off to the laser cutter.
VR,
LeeU

[aj34me]

Hi,
Would like to introduce myself, Lee Underwood from ABQ NM. I'm working on a Neu 1105 2Y 2S powered Outrigger scaled down in Inventor to 17.5" from the Kep's T3-21 V2 with the updated sponsons. It has been a lot of work but getting really close to sending it off to the laser cutter.
VR,
LeeU

Keep me informed on the progress please. Thanks, Ric

[LeeU]

A couple more
LeeU

[LeeU]

Last one unless you want more, just ask'
LeeU

[bhorowitz]

Just wanted to let you know, in case you haven't seen it, There is a design and drawings for a 2S Keps. Nicklas Edlund the designer has it on his web site for free.

[LeeU]

Thank you for the info but I wanted a little more adjustable boat.
LeeU

[ray schrauwen]

May I bud in and ask which one is best for 4S limited or spec racing? I looked on their site and it was only about 26" long, is this right?

[bhorowitz]

Ray,
Check on NE Stuff, one of the plans Nicklas offers is for a P limited boat. Send Brad Nichols a message. He or Jeff Ross may have some kits available.
Bob

[faja66]

hello all new to this forum. my mini only needs a rudder and its good to go. ill send some pics. Any idea on place to purchase one?IMG_20200108_151934.jpg

[Fluid]

Faja, right here in the OSE store! https://www.offshoreelectrics.com/pr...udder+Assembly



.

[monojeff]

Finally got this little guy on the water and looking good so far!

I need to figure out where some water is entering the boat but other then that runs pretty good for a little test rip. Time to do a bathtub soak and paint/graphics!!

https://youtube.com/shorts/isC66-ZrMWI?si=BrVkgHNkKl1yqIvI

[robstercraws]

Are these kits still around?