JAE video identification?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kacordy
    Senior Member
    • Oct 2012
    • 410
    #1

    JAE video identification?

    Does anyone know who owns the mini-sprint that is posted on the Zip Kits website. There are 2 videos. Watch the bottom one. It's very fast compared to the stock one in the first video. I would like to find out the motor kv, ESC, prop and battery combo that's in the 2nd video.

    Thanks, Allen
    Tags: None
    • SweetAccord
      Speed Passion
      • Oct 2007
      • 1302
      #2
      That is Jim's video.

      Jim Bob
      06-10-2011, 09:02 PM
      A new video of my "JAE mini sprint" I put in a new motor!

      http://www.youtube.com/watch?v=bDk8cmcEocs

      40 amp mystery ESC http://www.hobbyking.com/hobbyking/s...idProduct=9482
      3S 2650 mah battery
      4300 kV in runner motor
      1630 prop de-tongued and back cut
      1/4" x 1/8" stainless steel bearings in the strut
      I do not suggest this motor/ battery combo for everyday driving. It is extreme. If I were building a fleet for my family I would go with a 3800 kv motor.

      Yes, They are ball bearings. The prop is made by Octura. The Motor is a 2845...not sure of the brand. Both of those motors on 3s should be extreme!
      6-14-2011, 10:03 AM
      2 bearings in the strut. The front bearing is a standard bearing (http://www.bocabearings.com/bearing-...0125x025x09375) and is held in place by the front of the strut. Either the nose cone of the strut or the stuffing tube that is inserted in the strut. Then there is a piece of brass tubing used as a spacer to keep the bearing from walking to the rear of the strut. then a flanged and single shielded bearing( http://www.bocabearings.com/bearing-...50x02500x01094). I machined my strut so the bearings fit nicely, but if they are a little loose the drive dog and shaft will keep the bearings in the strut. I just use the shielded bearings.
      Last edited by SweetAccord; 10-03-2015, 10:10 PM.

        Comment

        • kacordy
          Senior Member
          • Oct 2012
          • 410
          #3
          Thank you sir for the information. This is exactly the information I'm looking for. I can guarantee I won't run the stock JAE 2s system for very long, lol

          Allen

            Comment

            • SweetAccord
              Speed Passion
              • Oct 2007
              • 1302
              #4
              Originally posted by kacordy
              Thank you sir for the information. This is exactly the information I'm looking for. I can guarantee I won't run the stock JAE 2s system for very long, lol

              Allen
              Should not run 2s really at all, 3s is just right.

                Comment

                Previous template Next
                Working...