Tweet
Hi all i have a Dave Frank Miss rock sport hydro hull length is 21 1/2'' beam is 11 3/4'' hull+ hardware+lipo=38 oz total weight the unfortunate part of this project is very limited interior space managed to sqeeze a Sea king 120 amp esc under front starboard deck im limited to a 2s 2500 mah 50c lipo in the battery tray and a 28mm dia x45mm b/l motor under the cowl . My goal speed wise around the 43 mph range. What kv rating would work? What brand of motor? Regards Andris Golts.
-
-
Wow, you are limited in motor size. Too bad you cant get a 2858 or 2860 in there. Anyways, This motor would work well on 2s seeing as you have a huge ESC and plenty of amperage room.
http://hobbyking.com/hobbyking/store..._Inrunner.html
If you could somehow "find" the room, this motor would be the bomb.
http://hobbyking.com/hobbyking/store..._Inrunner.htmlNEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight= -
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
This is an awesome little motor but, too bad it's so pricey: http://www.greathobbies.com/producti...od_id=AQUG7005
It's only 2200kv also so no room for more batts.
Nortavlag Bulc Comment
-
When I built several of these hulls 10 years ago I ran it in N2 Sport Hydro, it was a picklefork version, Atlas Van Lines...
I made a dropped pan motor mount and mounted a Lehner Basic 4200 motor in it and 6 Nimh cells, esc was a Barracuda 80 I think?
Is this the same thing you are building Andris? Nortavlag Bulc Comment
-
Thanks to all for the great information .Ray the plans for the Miss rock came from 1991 US boat and ship modeler magazine . Regards Andris Golts.Comment
-
Yep, same boat I built a few times. There are ways to fit stuff in.... Nortavlag Bulc Comment
-
I would look for something with 4200KV if only running 2S!Mini Cat Racing USA
www.minicatracingusa.comComment
Comment