Tweet
Finishing the Vac-U-Vee. The top or cover was cut to short at factory, so i laid 1/32 ply and ca'd it down. Came out ok for top. I put a brushed secret tower motor in for power. I used factory solid shaft but will change prop after things dry.. I see no trim tabs or turn fins in the instructions but will make turn fins.
-
-
any pictures Fred?.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Don't use GOOP as it eats the plastic. I couldn't find if GOOP has asetone in it or i wuldn't have used it. BTW, finding what GOOP did to boat, i trash canned it.Comment
-
I can't get hold of vac-u-vee gentleman to order a shell, any help needed.Comment
Comment