Metal prop upgrade?

[vans552]

What is a good metal prop for the joysway offshore warrior?

[martin]

On the stock esc you have to be carefull what you go to, an Octura x432 works well but dont go any bigger. If you use plastic props you can use x435 that Joysway offer as an upgrade prop themselves. I use a different motor & esc & run Octura x632 & get around 50mph. Martin.

[martin]

These are with Octura x632 detongued metal prop but with outrunner motor & upgraded 60amp esc on 3s 60c lipo.

http://www.youtube.com/watch?v=AuDAKRRtLA0

http://www.youtube.com/watch?v=TMuXLiVSl3I

[vans552]

I just got mine and it is stock I am running a 45c thunderpower. So the octura will work?

[ashcossie]

is this the right one for a offshore warror 2

http://www.ebay.co.uk/itm/OCTURA-X432-LH-Beryllium-Boat-Propeller-1-8-125-shaft-LEFT-HAND-/350558502536?pt=Radio_Control_Parts_Accessories&hash=item519eea3e88#ht_1519wt_906

[vans552]

will the octura x432 fit on the stock offshore warrior flex cable?

[Alexgar]

i use a sb 435 with a 50 amp esc ans a 450 2500kv outrunner on 4s and shes quick