Radio questions for micro boats

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sjslhill
    Fast Electric Addict!
    • Apr 2007
    • 1513

    #1

    Radio questions for micro boats

    I am building a 1/24th scale boat for R/C

    What radios are out there for this. I need a very small receiver and servo. I will most likly be running at most 3 of these together in the future. Any ideas?

    thanks for your time

    Steve
  • crazzy maxx
    Senior Member
    • Dec 2007
    • 498

    #2
    hs-55 micro steering servo
    and a mini lst radio and reciver are pretty small to.
    i have radio and reciver if u want it.
    snort pixi sticks=symptoms-:

    Comment

    • SJFE
      Fast Electric Addict!
      • Apr 2007
      • 4735

      #3
      Steve you may want to look @ unitedhobbies. They have a ton of micro receivers. I'm sure you can find somthing that will work:).

      Comment

      • ED66677
        Fast Electric Addict!
        • Apr 2007
        • 1300

        #4
        beware of micro receiver, they were originaly designed for park flyers, so the range of use is very short, don't go too far with your model or you will loose control
        Emmanuel
        I'm french but I doubt I really am!
        http://pagesperso-orange.fr/pleindetrucs/

        Comment

        • Eyekandyboats
          Fast Electric Addict!
          • Apr 2007
          • 1921

          #5
          I believe there is a servo called the blue bird which is even still smaller then the HS55.
          as for receiver, will you will have to find one that works with your radio which is not always the easiest thing to do, Or you use a air plane radio and you will have a whole slew of recivers to fit the boat
          EYEKANDYGRAPHICS

          www.rclipos.com

          Comment

          • sjslhill
            Fast Electric Addict!
            • Apr 2007
            • 1513

            #6
            thanks guys....no airplanes where I run, it's a lake with trees everywhere.

            Comment

            Working...