little rigger???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • steve-b
    Senior Member
    • Mar 2010
    • 245

    #1

    little rigger???

    Hey all,

    I just bought a small rigger (18"). I will be running a Lehner 1530/8 3572kv, and a 120A ESC, 3s batteries.
    I'm thinking that ill use a .130 flex as i can get a 4mm/.130 coupler from OSE.
    My question is... what size prop would be a good place to start? Ive never had a rigger this small before, and I'm not sure.
    This boat will be intended for SPEED and that's it.
    Any suggestions on a set up would be great, even what hardware to use, as ill need that too.
    Looking forward to reading your thoughts... i know theirs allot of knowledge on this sight.
    SHOW ME THE LIGHT.

    Steve.
  • Diegoboy
    Administrator
    • Mar 2007
    • 7244

    #2
    2S lipo
    This Rudder
    3/16 Small Strut & 2 1/4 Inch Rudder w/ water pickup on THIS page
    THIS flex shaft

    and...

    THIS prop
    "A quick temper will make a fool of you soon enough."
    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Bruce Lee. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Comment

    • steve-b
      Senior Member
      • Mar 2010
      • 245

      #3
      YA, i ment 2s.
      Thanks for the info.

      Comment

      • NativePaul
        Greased Weasel
        • Feb 2008
        • 2761

        #4
        2s on 3572KV with an X432 will be slower than a mini oval boat which run around 30 mph but should net you about 7 minutes run time on 2200mAh pack, 3s on that same prop should be a little faster than mini oval, we have guys that use that same motor on 3s with a 29mm prop for mini oval's 5minute run time, an x432 should net you about 3.5minutes on 3s 1800mAh, for SAWs I would go 3s and an x632 with the aim of moving up to a v935 if everything is cool.
        Paul Upton-Taylor, Greased Weasel Racing.

        Comment

        • steve-b
          Senior Member
          • Mar 2010
          • 245

          #5
          Well, i certainly want to go allot faster then 30 mph.

          Comment

          • Alexgar
            Fast Electric Addict!
            • Aug 2009
            • 3534

            #6
            id start with plastic props before i went all out an a s/b prop

            Comment

            Working...