Tweet
Hi all i have a Lehner basic XL 3600 motor and it have an shaft dia of 3.175mm .So i am looking for a Coupler Flex Collet for this to hook to my 3/16" shaft adjustable stinger drive .?
-
This is the boat that the Lehner Xl 3600 motor going into -
-
A .130 coupler may work although it is .005 inches bigger than what you say your cable is.Comment
-
Motor shaft is .125" (1/8")
3.175mm = .124" .001" clearance.
If you use .125 flex cable you will need a 1/8" to .125" coulper
If you use a .150 flex cable you will need a 1/8" to .150 coulper
LarryPast NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & WetComment
-
This is what you want to use:
http://www.offshoreelectrics.com/pro...=oct-ocfhe1813
It will work just as well for 0.125" or 0.130" cable. I use both sizes of cable and have no real trouble making them fit this flexhex.
.ERROR 403 - This is not the page you are looking for
Comment
-
Mam O man $8.90 to ship to NY ? boy that very high .I ship all day for Ebay and can ship 4lb anywhere i the usa for $5.95 and this item will cost me $1.50 to ship i look for other seller ,thank for info and what the . for 3/16 "Comment
-
Shipping rates for most of us are set at a flat rate. While it may be cheaper to ship to NY, it costs MORE, for example, to ship to Seattle. So a flat rate is established. Sometimes you win, sometimes you lose. The rate is normally set somewhere in the middle. I guess you could spend $100 or so in gas and drive up to get it!
Mini Cat Racing USA
www.minicatracingusa.comComment
Comment