1/12 Proboat Miss Bud Brushless 37.2Mph

[Doby]

Diego; Nice spot to run your boat, to bad about the "potholes" you have there
There's no reason you won't get yours in the same speed catagory, after all , they are related :)
I'm running some really hot IB4200's that I got off of OSE last year, I wish Steve would still make the custom packs, the 4 packs I got from him are the best of my lot.

By the way ,,,how's the turtle

[saleens7]

Diego; Nice spot to run your boat, to bad about the "potholes" you have there
There's no reason you won't get yours in the same speed catagory, after all , they are related :)
I'm running some really hot IB4200's that I got off of OSE last year, I wish Steve would still make the custom packs, the 4 packs I got from him are the best of my lot.

By the way ,,,how's the turtle

i think the reason he didnt flip at those speeds is because the electric setup he has in his is heavier than a nitro....the people who kept on flipping at those speeds used a nitro setup, wich usually is lighter than electric....

[Diegoboy]

Ya she's heavy. I still want to weigh her loaded. The turtle was dazes, but Okay. He caused me $17 and a prop. Pic in a moment.

[Piranha2]

looks great, nice and stable and she can cover some water fast.......the ending was bad but I did laugh, sorry.

[Diegoboy]

The rudder hit the turtle then pushed the rudder into the prop.

[saleens7]

ouch..... please dont tell me that was a balanced and sharpened prop....what a waste

[Diegoboy]

It was a grimracer prop 42x55

[Doby]

Diego,,,,its not going to run well in that configuration:D
One advantage of plastic props is that they will shatter and sometimes prevent other components from being damaged. Have you tried the SV 27 prop ??

[Jeepers]

ouch! that really bent that prop shaft! I would use it as an excuse to put on a adjutable strut! the boat looks great on the water!