Hacker Navy 70 Programming

[domwilson]

Hi All,
I have a hacker Navy 70 opto that I finally want to use. Does anyone know how to program it or if the program box Steve sells for the Pulso will work?

Thanx.

[domwilson]

This is the program box... http://www.offshoreelectrics.com/pro...=xpo-programer

[egneg]

I have Hacker Master 70N that I bought used and just installed it (didn't program anything) and it ran fine on 4S.

[domwilson]

I've used mine in the past as well. Wanted to program the LVC. I know I could use a liposhield but don't want to buy one if I don't have to.

[JimClark]

I can send you the programing documents just give me a email address
Jim

[domwilson]

Thanks Jim, You have a pm. I noticed in the past you had one. How did you set the LVC on yours?

[egneg]

The one I have came from Jim - maybe that's why I didn't need to do anything.

[JimClark]

You have to have the program box for the low voltage cutoff
I still have two 70's and one 40amp and they work great
file sent to the email you provided
Jim

[JimClark]

Yes it was programmed with the box

The one I have came from Jim - maybe that's why I didn't need to do anything.

[domwilson]

Thanks Jim.

[RMZDADDY]

If all else fails, I have the Hacker programming box, I'd be happy to let you borrow it if you like. It would fit in a bubble envelope, and all you would need is a receiver pack to power it.
-Tim

[domwilson]

If all else fails, I have the Hacker programming box, I'd be happy to let you borrow it if you like. It would fit in a bubble envelope, and all you would need is a receiver pack to power it.
-Tim

Thank you, Tim. I will consider it.

[JimClark]

Glad to help

[domwilson]

It appears that the Jeti and Pulso programming cards are the same. So I hooked up the Pulso program box and it seems to program the Hacker ESC ok. Will test later.

[JimClark]

I was wondering about that the esc's abd the box look like a total knockoff.


Jim

It appears that the Jeti and Pulso programming cards are the same. So I hooked up the Pulso program box and it seems to program the Hacker ESC ok. Will test later.