What esc is water proof and water cooled?

[Cam]

Hello. I was wondering if anybody knows what brusless esc I should use for a 16 inch mono hull. I will be using an ammo 28-45-2700 motor. I am looking for an esc that is water cooled and waterproof. I will be running the boat ion 3s lipo. any suggestions would be great. Thanks.

[Jeff Wohlt]

Etti 90 amp is nice.

[mikesf]

I 'll second the ETTI but I think that 90A would be an overkill... 60A would suffice I think...

[Jeff Wohlt]

True. Always good to be overkill on the ESC. One less thing to worry about when playing with props.

[mikesf]

I agree that an amperage surplus is always nice to have, if you can afford it in $$, space and weight. Since 16" is pretty tight the bigger esc could rob off precious space and lack of ways to balance the hull....

(I ran in my small H&M NS1 a hydra120, the ESC is barely warm but I have the space to tuck it in...)

[RPC1]

May I suggest the Turnigy 60 amp 2-6s with BEC.

http://www.rc-fans88.com/details.asp?prodid=1476

[785boats]

sorry. Wrong post.