Lipo ballancing

[wamf]

After reading a thread about unballanced lipo's I decided to check my own. Several of them are off by 4/100th of a volt. It's mostly the budget chinese variety. However I noticed that the better ones I had that were perfectly ballanced prior to charging weren't ballanced perfectly after charging.
I am using the hyperion eos0606i ac dc charger. The warranty is about to expire, should I be concerned?
Thanks
MikeV

[G Doggett]

Lipos will get out of balance with use but if you let your Hyperion charger run long enough with the balancer connected it should automatically correct this.
I never disconnect my lipos from the charger until I can see that all cells are at 4.21 volts. If a cell is still higher or lower than this let the charger do it's thing.
Graham.

[wamf]

Lipos will get out of balance with use but if you let your Hyperion charger run long enough with the balancer connected it should automatically correct this.
I never disconnect my lipos from the charger until I can see that all cells are at 4.21 volts. If a cell is still higher or lower than this let the charger do it's thing.
Graham.

Thanks I'll try that.
MikeV