1515 Neu motor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • EPower
    Banned
    • Mar 2009
    • 391

    #16
    Originally posted by knpc
    I don't know how the lizard handles at 50+, I was just giving him a setup of a similar size mono. I have a 9xl in my other mono and it works well also with speeds in the upper 40s.
    The Lizard Xtreme handels great and runs nice and strait, in the Vid i did 87.6 Kmh that's around 53 Mph
    Thanks Guys for all the feedback i will stay with what i have right now and the next order with Hobbycity i will get a KB45-08L 2300kv and run 4S/2P setup in it i was told a while ago that the KB would not like a 2P setup not sure why but worth a try for 45 bucs

    Adrian
    Last edited by EPower; 05-14-2009, 12:23 AM.

    Comment

    • crabstick
      Senior Member
      • Jul 2008
      • 954

      #17
      maybe the Person was meaning 2S ?

      i nearly went for the 8L over the 8Xl, I figure the 8xl is less loadwise on my 120amp hextronic smoke controller. And plus I haven't used big props since running Nitro.
      Matt.
      FE, Nitro and Gas racing in Auckland
      www.rcboats.co.nz

      Comment

      • DISAR
        Fast Electric Addict!
        • Aug 2007
        • 1072

        #18
        Epower

        May I ask why you want to change the KB45 8XL?
        Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
        http://www.rcfastboats.com/

        Comment

        • EPower
          Banned
          • Mar 2009
          • 391

          #19
          Originally posted by DISAR
          Epower

          May I ask why you want to change the KB45 8XL?
          Disar i have an xl now i want to try an8l 2300 kv on 4S/2P i'm running 8xl 1600 kv on 6s 1p at the moment i have 3 brand new 4S/5300mAh/25C batt i don't know what to do with them

          How's the sprint cat going

          Comment

          • DISAR
            Fast Electric Addict!
            • Aug 2007
            • 1072

            #20
            I had some adjustments made on the strut and cog but not tested yet, hopefully tomorrow. I will let you know the results.

            Your Lizard runs very nice, may I ask is there a flat area on the keel just before the transom? Or is the keel round?
            Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
            http://www.rcfastboats.com/

            Comment

            • EPower
              Banned
              • Mar 2009
              • 391

              #21
              Originally posted by DISAR
              I had some adjustments made on the strut and cog but not tested yet, hopefully tomorrow. I will let you know the results.

              Your Lizard runs very nice, may I ask is there a flat area on the keel just before the transom? Or is the keel round?
              keel is round,let me know how the cat goes m8

              Comment

              • DISAR
                Fast Electric Addict!
                • Aug 2007
                • 1072

                #22
                Ok
                Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
                http://www.rcfastboats.com/

                Comment

                Working...