Anyone with experience with this 180a speed control?

[sailr]

Turnigy is Hobbycity's own brand. Usually applied to other people's stuff. In this case, the SEAKING which is made by Hobbywing. I have never used this ESC but I can tell you that Hobbywing makes the best damned airplane esc's coming out of china. Super reliable.

Was searcing ebay for speed controls and i came across this-

http://cgi.ebay.com/SEAKING-Electronic-Speed-Controller-180A-ESC-For-Boat_W0QQitemZ270386196406QQcmdZViewItemQQptZRadio_Control_Vehicles?hash=item3ef445efb6&_trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

looks just like this-

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8937

Same specs, same look..


Same thing?!

[sailr]

You must have gotten a half-a$$ed one

I have tried to run mine three times and every time it would give me only half voltage.....i was running 4s and could only get 23mph out of my Mean Machine....soon as i exchanged the turnigy with one of my other esc's the boat ran 43mph....I havnt figured out the problem yet

also mel279 has the same problem that I am having

[RPC1]

Sounds like a programing problem. I know the default throttle setting is auto calibrated. Did you change anything?

[bustitup]

Sounds like a programing problem. I know the default throttle setting is auto calibrated. Did you change anything?

I agree on programing problem..........I bought the seaking programmer ver2
And followed the instructions for a boat........there are only 4 settings so I have to re try and hope it was my error