32" apperatrion !!!!!!

[bigpapa]

is this boat a decent investment...... has anybody seen one or have one

seems to have lots of potential

[z400]

Any info you can provide?

Is this another one of those boats from China?


I googled "32" apperatrion" and had 0 results as far as an r/c boat goes..

[Jeff Wohlt]

There are thin spots in the hull sponsons. They look nice and are decent price but $140 to have it in hand --- Not sure it can take a stuffing or two without serious damage. It is a rip off of another well known hull.

I almost went with twin SV drives on it...they will work and a couple UL1 motors but decided to stay with one strut and rudder.

Great finish on it and I am going to run mine un-reinforced and see what happens. Someone on here has one with 8XL that is very fast with video to watch.

I would make sure and do another layer or two or FG cloth or CF if you want and plan to put time and money and want to keep it for a while.

[785boats]

There's a thread right here with a lot of pro's & con's.

http://forums.offshoreelectrics.com/...ead.php?t=5487

Happy reading.
Paul.

[bigpapa]

tks guy's still looking at the ul1 also

[Tony]

I have one with a Feigao 9XL , ETTI 125 esc, X642 setup. You can get the hull on eBay for $99

[ozzie-crawl]

i have 2 of them one iam doing as a twin motor setup the other runs a 7xl on 4s does between 55-60 mph depending on prop, i have stripped it down at the moment and added a fair amount of carbon fibre as it was starting to crack in the steps from a few flips

[Tony]

i have 2 of them one iam doing as a twin motor setup the other runs a 7xl on 4s does between 55-60 mph depending on prop, i have stripped it down at the moment and added a fair amount of carbon fibre as it was starting to crack in the steps from a few flips

7xl on 4s and how many mAh? mine 9xl runs 4s 4000 to 5000mAh

[ozzie-crawl]

i run 4s 2p 7400mah total