What Are Sniper Hulls & Any Other New Brands To Consider??

[crrcboatz]

Just looking for choices in hulls. Can anyone provide links to some of the lesser known but quality boats availabe? Are there any foreign hulls aside from the more obvious china and japan based stuff?

Links would be a great help.

Curt

[Flying Scotsman]

https://www.mhzusa.com

http://www.offshoreelectrics.com/pro...prod=df-sniper

Douggie

[ED66677]

H&M top quality
HPR hudge cats
team-lindenau
RC Raceboat nice micro cats
toys-port
RCMK

[calcagno45]

Here's a nice hull that runs great with a gas motor for sure LINK

[Doug Smock]

http://www.seaducerboats.com/

[crrcboatz]

Here's a nice hull that runs great with a gas motor for sure LINK

I have one of these in the aeroshark brand with an rcmk rear exhaust engine.

The seaducers, are they used in fe? What sizes of seaducers?
In gas they require a GREAT deal of setup in order to get them to run their best. Jerry even sends the proper props in order to assure the best running. They are very sensitive to props, and setup. Is that the case in Fe?

[Bill-SOCAL]

http://www.deltaforce-hk.com/products.html

Steven sells Delta Force hulls as do a couple of others. But you are here, why not shop with the best?

The Sniper is a great FE hull. Mine has been over 81 mph a few times, and not just in the car on the way to the lake. Can't ever seem to back it up, but someday!!

[mike martin]

Ricoracing.com

[Doug Smock]

I have one of these in the aeroshark brand with an rcmk rear exhaust engine.

The seaducers, are they used in fe? What sizes of seaducers?
In gas they require a GREAT deal of setup in order to get them to run their best. Jerry even sends the proper props in order to assure the best running. They are very sensitive to props, and setup. Is that the case in Fe?

The 33,38,42,and 45 are used for FE.
Some have difficulty setting them up, I've had good luck with them.
Good luck whatever you decide to build!!
Doug

[Doug Smock]

Ricoracing.com

These are nice boats as well. I just built Rico 31"mono..... I like it!

Mike Martin is going to hate it.

[crrcboatz]

Im ok with a 32 inch mono, I am looking for a 36" if I can find something that length for the next class up from the 32. Any suggestions? The seaducer is a super hull but I want something that is not so hard to setup. The 36 " length just seems to be ideal for the next step up.

[Bill-SOCAL]

As I noted on the IW thread you have going, Delta Force makes a couple of mono hulls in the 35 to 39 inch range.

http://www.deltaforce-hk.com/df45mkii.html

http://www.deltaforce-hk.com/df.html

[DISAR]

I would recommend this one eventhough I don't have it. MHZ are nice and good hulls

http://206.206.85.209/xtdoc/Details.aspx?ProductCode=m-1693&store=mhzusa

Also you can have this one but these are more difficult hulls to set up correctly

http://cgi.ebay.com/39-deep-V-mono-boat-for-45-67-nitro-or-electric-motor_W0QQitemZ130238193411QQihZ003QQcategoryZ2564QQcmdZViewItemQQ_trksidZp1742.m153.l1262?_trksid=p1742.m153.l1262

I bought mine from UK, but I would not recommend it. Difficult to set up and very long delivery times (months). It is the Cougar, says 39" but it is 36".

http://www.prestwich.ndirect.co.uk/deepvpuma.htm

If I buy a new mono hull I would go from MHZ

[EPower]

http://www.deltaforce-hk.com/products.html

Steven sells Delta Force hulls as do a couple of others. But you are here, why not shop with the best?

The Sniper is a great FE hull. Mine has been over 81 mph a few times, and not just in the car on the way to the lake. Can't ever seem to back it up, but someday!!

Wow 81 mph must be a world record would love for you to back it up someday

MHZ do make some nice hulls i own two of them but they pricey MHZusa leave allot to be desired i would never deal again with Dr. Loo Yap

Cheers Adrian

[Bill-SOCAL]

Wow 81 mph must be a world record would love for you to back it up someday

Cheers Adrian

That boat does hold a NAMBA SAWS record for a T Offshore boat of 76.94 mph. The T mono record in NAMBA is 83.98 which I think this boat can do, I just need to get a different motor to take a shot at that record. My 76 mph number was done using an oval set up (700 Kv motor) so I think there is more speed there.