mis vegas electric

[launchpad]

Hello guys;

I just finished converting my vegas to brushless.So far all went well.The problem I am having is;when I arm the unit the trigger works backwards.If I bush the trigger forward it stops and when I let go back to neutral position the motor keeps running.Does anyone have any idea as to why this is happening?
Thanks in advance
Al

[AntronX]

When you ask questions like these, you have to post what equipment you are using.

[Ub Hauled]

that is due to the fact you are using an airplane ESC, there are two ways to fix that, one is the rubber band way (holding the trigger on the brake position) and the other one is using a Pistix.
Either way you'll get to run it fine.

[launchpad]

arming problem

Hello there;
Sorry about that I did not know that I needed to put all the info in.Learn something new all the time.Anyway here is what you requested;

*XL x-power brushless motor
Hextronic 120a esc programmable
Aquacraft RX-100 Receiver
Aquacraft SX-100 servo
Aquacraft miss vegas trans
2x2s1p 5000mah lipo

Ok,I hope this helps,next time I will give all the info that is needed.I just got into boats about a year ago and so far I have added a few to the collection.I learn as I go and will try my best to do more research on boats.I never thought that they would be so sofistacated.I also have 4-5 rc trucks;all elec.
As my wife says to me all the time;still at 13 heyyyy.You know what they say,just say yep....here I am at 59 years young and playing with all these toys.
If i want to put some photos of my boats in here,how do I go about it.

Got to go,granddaughter pulling my handdddddddd Al

[launchpad]

arming problem

Hello there;
Sorry about that I did not know that I needed to put all the info in.Learn something new all the time.Anyway here is what you requested;

8XL x-power brushless motor
Hextronic 120a esc programmable
Aquacraft RX-100 Receiver
Aquacraft SX-100 servo
Aquacraft miss vegas trans
2x2s1p 5000mah lipo

Ok,I hope this helps,next time I will give all the info that is needed.I just got into boats about a year ago and so far I have added a few to the collection.I learn as I go and will try my best to do more research on boats.I never thought that they would be so sofistacated.I also have 4-5 rc trucks;all elec.
As my wife says to me all the time;still at 13 heyyyy.You know what they say,just say yep....here I am at 59 years young and playing with all these toys.
If i want to put some photos of my boats in here,how do I go about it.

Got to go,granddaughter pulling my handdddddddd Al

[launchpad]

Thanks for the great info,do you know where one of them can be latched onto.Am I right when I would guess this esc is for planes.I do have another esc on the way it is a seaking 90amp burst 130 and water cooled so it is made for marine use.
Its great to be able hook up with someone that can steer ya in the right direction, Thanks Again
Al

[Ub Hauled]

........If i want to put some photos of my boats in here,how do I go about it.

Al,
scroll down and click on the "manage attachment" once you are in the reply to post mode... the rest is "follow the instructions kinda deal".

[launchpad]

Here are some of my boats,the rio51 is not stock,it has a G2D modified motor from Marine-Specialties it has a walbro big bore carb,intake has been raised,exhaust timing has been lowered,transfer ports widened and the cylinder milled to raise compression.It travels across the water very fast.

[AndyKunz]

when I arm the unit the trigger works backwards.If I bush the trigger forward it stops and when I let go back to neutral position the motor keeps running.Does anyone have any idea as to why this is happening?

Al,

You might try fiddling with the end points (called EPA or ATV depending on brand) and the neutral. If you have sub-trim on your radio, that might help you some too.

If none of that works, the PiStix will be available again in a couple weeks. I have a handful of them on the way to my house for checkout/programming and I'll be returning them to the mfg for selling by the hundreds. Offshore Electrics is one place I know that will have them.

Andy

[launchpad]

Hello;

Thankyou for the info,could you contact me and let me know when they are available.You can email me direct at;[email protected]
Again,Thankyou very much
Al

[Flying Scotsman]

Al, Andy is the designer and was the manufacturer of the PiStix and they work great. He recently sold the rights of production to one of the big boys.

Douggie

[launchpad]

Any idea where they can be picked up?

[Doby]

Here are some of my boats,the rio51 is not stock,it has a G2D modified motor from Marine-Specialties it has a walbro big bore carb,intake has been raised,exhaust timing has been lowered,transfer ports widened and the cylinder milled to raise compression.It travels across the water very fast.

Thats quite the angle on the strut of the Rio!
I've got one as well, and its not stock either

[launchpad]

Hello;
I found that it ran much better in rougher water like this.I adjust it to suit the water.
What have you in yours.

[Doby]

LMT 3080 12T running on 10S. It moves quite nicely!