Tweet
Which is stronger JB weld or 30 minute cure epoxy? What is the best use for each? I am going to be using it to glue the mount to the boat for the motor. There is both wood and metal
-
-
JB weld....saleens7, the wookie of rc boating -
If it were glass hull I would go get a little glass matt and resin and glass it in if possible. you would be adding structure as well as making one strong motor mount. and I would almost think doing that you could get the mount out easier if you ever had to for some reason.Comment
-
motor mount
I like to epoxy and fiberglass in a thin board with three taper head 6/32's sticking up through it. This way if I want to change the motor type or add a trans, I just bolt in a different mount.ReddyWatts fleet photo
M1 Supercat - Neu 1527 1Y, 8s / Mean Machine- Feigao 580, 8s, 120 HV esc
Mean Machine - Feigao 540 14XL, 8s, 100 amp HV esc, X537/3Comment
Comment