Laser Cut Riggers?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hide
    Senior Member
    • Dec 2008
    • 188

    #1

    Laser Cut Riggers?

    I have access to a laser cutter and a CNC machine, so does anyone know of any CAD plans that I can get through the internet, cut out and then build?

    I have access to many different woods too, so this could be a nice project for the summer.
  • Meniscus
    Refuse the box exists!
    • Jul 2008
    • 3225

    #2
    What size are you looking for? In overall length?
    IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

    MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

    Comment

    • hide
      Senior Member
      • Dec 2008
      • 188

      #3
      Could have sworn I put length in there. Well, I already have the 1521/1Y which will only be used a tiny bit in the glass boat. So something which could be used with that, probably 4S Lipo. So I'm thinking around 30"-35"

      Comment

      • yurkanip
        Banned
        • Jul 2008
        • 420

        #4
        I sent you a set of plans...and a pm...let me know what you think.

        Patrick

        Comment

        • hide
          Senior Member
          • Dec 2008
          • 188

          #5
          PM'ed you back

          Comment

          • Meniscus
            Refuse the box exists!
            • Jul 2008
            • 3225

            #6
            hide, Please post if you need additional plans.

            Yurkanip, How about sending those plans to me, I'm curious as to what plans you are looking at. Thanks.
            IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

            MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

            Comment

            • hide
              Senior Member
              • Dec 2008
              • 188

              #7
              I'll see how these ones turn out first, but I'm always open to new ideas :)

              Comment

              • Meniscus
                Refuse the box exists!
                • Jul 2008
                • 3225

                #8
                Be sure to start a build thread and take lots of pictures. There are many here that can make very helpful suggestions as you progress with your build.
                IMPBA: 7-Time FE World Record Holder "Don't think outside the box. Rather, refuse to admit that the box exists in the first place!"

                MGM Controllers - Giant Power Lipos - ML Boatworks - Wholt's Wire Drives & Struts - Nano-Oil

                Comment

                • hide
                  Senior Member
                  • Dec 2008
                  • 188

                  #9
                  Since I have no money at all at the moment, I'll probably just build the hull, without hardware for the moment. But I will be sure to take photos

                  Comment

                  Working...