Large deep v hull Brushless

[bababoboRc]

Hi Guys

Ok i have an Mhz Chaparral and i want to go electric
What motor & esc combo would i need for this setup
i want to run 8s or 10s

Regards Adrian

[Steven Vaccaro]

Adrian what size is this boat?

[bababoboRc]

Hi Steve the boat is 52 in long its an MHZ chaparral
Thanks for the help

Adrian

[calcagno45]

Just a pre-warning, this is going to be an expensive setup.

[bababoboRc]

money is not really a problem M8

[SJFE]

Is that a new design from MHZ?

[Flying Scotsman]

A very neat hull

http://206.206.85.209/xtdoc/Details.aspx?ProductCode=m-1683&store=mhzusa

Bill. Peter and Mad Mike can help you out
Douggie

PS, Tom... SJFE... great to see you back!!!

[Flying Scotsman]

An interesting reply from Adrian on a pm...back to you

M8???

Douggie

[bababoboRc]

Hey M8 How you going ,well it's not time to go Bigger i'v had this hull now for about 1 1/2 years al setup ready to go with zen with R245 kit but decided to go electric

M8 i had a mishap with the lizard ran it this morning x442 prop after about 30 sec on the water i was doing a pass flatout and a loud bang my lid flew 6ft in the air never seen anything like it brought it in and blew the capacitors WT******

i'm pissed lost my lid do you know anyone who got one ??


The motor is for sale too
brand new
CCracing alloy carb spacer
CC Racing lightened piston
CC Racing copper gasket
drop down mounts for 5 in rails
****** 600 $ NZD *********

Sent you a PM Douggy

[Flying Scotsman]

Adrian, you do not state where you are from in your profile...???? M8 ??? Woops now I understand M8 = Mate. No text language please. As I do not comprehend this bastarted language
Douggie

[bababoboRc]

I live in the land of the long white cloud New Zealand M8 = Mate

[bababoboRc]

Ok No problem Douggy so who can help me with this setup

[Flying Scotsman]

The big boys will chime in and you may wish to view RRR as another option on big boats and you are talking a lot of cash....$2,500 min
Douggie

[crrcboatz]

Hey M8 How you going ,well it's not time to go Bigger i'v had this hull now for about 1 1/2 years al setup ready to go with zen with R245 kit but decided to go electric

M8 i had a mishap with the lizard ran it this morning x442 prop after about 30 sec on the water i was doing a pass flatout and a loud bang my lid flew 6ft in the air never seen anything like it brought it in and blew the capacitors WT******

i'm pissed lost my lid do you know anyone who got one ??


The motor is for sale too
brand new
CCracing alloy carb spacer
CC Racing lightened piston
CC Racing copper gasket
drop down mounts for 5 in rails
****** 600 $ NZD *********

Sent you a PM Douggy

I have 3 different RCMK engines the brand you are holding in the pic. Just got the new S254 and it should "own" the stock class in impba this year. Great motors and a nice change from zenoah.

Curt

[robby76]

this article might help out some way. just hope the scans were of good quality. you might want to print them out also.
edited:
OK, you will have to download them as is and open them up with 'Paint' or a good picture veiwer.
edit 2:
well it appears it is not going to work out. so send me an email and i will send the article to you. it is by our own " Jay Turner" which appeared on the radio control boat modeler magazine Fall 2008 pages 64, 65, & 66.