getting back into water sports

[Riversidedan50]

getting back into water sports and ran across this unit thinking it would work good on a bud light tunnel
whatdoya think??? tfl 542b20

shafts break easy??
what prop to run??
and howbout a turn fin on the bud light?>
and any other things am not aware of......" had a bud light few yrs ago and other type lectric boats but didnt really get into it having a simple a brushed 500, but now the games changed!

below is a pic of a ABS boat I had back in 2000 and never found another one like it again and was obviously an inboard, some are close but not the same animal.......

[Bande1]

sure. nobody really knows what you are talking about in terms of a "bud light". the livery on some random hull is pretty meaningless to identify a hull.

A good way to go on a tunnel hull is to build one out of wood like the zippkits G30.

https://zippkits.com/index.php?main_page=product_info&cPath=71&products_id=833

[Riversidedan50]

mrp bud light tunnel ABS HULL produced in the 80s were common but now hard to find.............

yes am familiar with the G30 kit and is a fine zippkit product which might be an alternative......

[TLH101]

If you are going to build a G30, take a look at the larger version of the outboard. This one is on a Dumas 24" boat.
https://www.offshoreelectrics.com/pr...rod=tfl-B54210
20250204_092252.jpg

[Riversidedan50]

is the the same motor advertised at offshore??

[TLH101]

is the the same motor advertised at offshore??

Yes, see link in my previous response.

[Alfa Spirit]

Have a loook to HydroMarine, great hydros,

https://www.hydromarine.de/Hulls/Hydroplanes:::130_2.html

Temp 4841322...jpg