Tweet
Anybody have a water jacket for a Neu 2230 laying around they want to sell? Or do you know where I can get one?
Thanks
Mark
Thanks
Mark
-
-
That's 40 mm correct? I have a couple I used on a 1527 probably would work. I would have to check -
Last edited by pescador; 01-20-2025, 09:03 PM.Namba District 16
1/8 Miss U.S., 1/8 59 Maverick, 1/8 Executone, 1/8 Smokin Joes, MLGSX380, AC Pro40II Q Sport, AC Pro40II nitro,Twincraft mono 10s, Vision AOPC, VS1 FE, M34.Comment
-
I got mine from HRC manufacturing years ago.
I searched around on the net for ya but unfortunately I didn?t come up with anything.
Sent from my iPhone using TapatalkNamba District 16
1/8 Miss U.S., 1/8 59 Maverick, 1/8 Executone, 1/8 Smokin Joes, MLGSX380, AC Pro40II Q Sport, AC Pro40II nitro,Twincraft mono 10s, Vision AOPC, VS1 FE, M34.Comment
-
Yea the owner of HRC died ears ago. The 2230 is a 56mm motor and this one has fins on it so it's big.Comment
-
I wonder if it?s something that Stumpfab could make
Sent from my iPhone using TapatalkNamba District 16
1/8 Miss U.S., 1/8 59 Maverick, 1/8 Executone, 1/8 Smokin Joes, MLGSX380, AC Pro40II Q Sport, AC Pro40II nitro,Twincraft mono 10s, Vision AOPC, VS1 FE, M34.Comment
-
What is fin od? What is space betWeen fins?
Nortavlag Bulc Comment
-
The motor is 5 1/4 long and the finned part is 3 1/4 L The OD is 57mm and the finned part is 63mm. That makes the fins 3mm tall with a spacing of 2mm between fins. The fins could be machined down a little if necessary.
MarkComment
Comment