custom props question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kevinlew211
    Senior Member
    • Aug 2008
    • 586

    #1

    custom props question

    anyone know where they do custom made prop, let say i want a Prather 240 right handed one, is that possible? any other company beside Octura making right handed props out there?
  • Steven Vaccaro
    Administrator
    • Apr 2007
    • 8718

    #2
    Contact abc props for a bunch of right handed props.
    Steven Vaccaro

    Where Racing on a Budget is a Reality!

    Comment

    • kevinlew211
      Senior Member
      • Aug 2008
      • 586

      #3
      Originally posted by Steven Vaccaro
      Contact abc props for a bunch of right handed props.

      thanks, but look like most of the R props are 3 blades, example, 2016 and 2018, its exactly what im looking for but i want 2 blades, do you know if they also making 2 blades with R props?

      Comment

      • video200
        Senior Member
        • Feb 2008
        • 837

        #4
        you can always e-mail propshop uk to get a prop chart. they make ALOT of different probs that goes both right and left. [email protected]

        Comment

        • bonewar
          Senior Member
          • Jan 2008
          • 549

          #5
          Kevin, CMDI do custom props L/R . 2 blade , 3 blade , 4 blade . All sizes . Have a look at there web site i think its called CMDI RACING . There props are awesome. good luck . Bonewar
          SIMRAD MARITIMO TWIN 1512 NEU'S , M12 MARITIMO SINGLE 1527 NEU , SV27 1509 NEU , SV27 NITRO O.S. 18CV-R 3.0cc WATER COOLED RACE ENGINE.

          Comment

          • kevinlew211
            Senior Member
            • Aug 2008
            • 586

            #6
            Originally posted by bonewar
            Kevin, CMDI do custom props L/R . 2 blade , 3 blade , 4 blade . All sizes . Have a look at there web site i think its called CMDI RACING . There props are awesome. good luck . Bonewar

            Bonewar,
            im glad you jumped in, how those CNC props treating you? i thought about those props too but, they dont make nothing over 50mm yet? wow, i have been waiting for a long time.

            Comment

            • bonewar
              Senior Member
              • Jan 2008
              • 549

              #7
              Kevin, Mate i've only run the cat once with those cnc 45mm /69mm/2.7 pitch 3 blade props mid lift,They ran well but i wasn't really pushing the boat hard that day. I've been using octura x442 detounged,cupped. I really like the CMDI props , I have a few of them that i run on a little SV27 with a neu in her and they out perform the octura props the same size . When i have done more testing with the bigger props I'll let you know. I also just bought a set of CMDI cnc 38/60 3 bladed low lift props , So let the testing begin. Bonewar
              SIMRAD MARITIMO TWIN 1512 NEU'S , M12 MARITIMO SINGLE 1527 NEU , SV27 1509 NEU , SV27 NITRO O.S. 18CV-R 3.0cc WATER COOLED RACE ENGINE.

              Comment

              Working...