Whats up with the OSE 6 MM connectors ?

[Andris Golts]

Hi all i notice with the OSE 6mm male bullet plugs after about 20 times of plugging and unplugging the male plug is loose i go to move the pins out and they break off .I have also noticed the pins breaking off after pulling them apart after a run ! Has anyone had this problem ? Regards Andris Golts.

[vvviivvv]

Get some lehner’s, I use them on all my boats / configurations and 0 problems,

Also probably the highest quality bullet on the market.

[Addicted]

I have the same problem on my high KV motors. I typically jab a 2.0 or 2.5mm Allen in the middle to spread them out every once in a while. I've broken a few pins by over spreading.

[Andris Golts]

Thanks for the info. Regards Andris Golts.