Titan 29 Brushless

[Norman2]

Hi, Just Converted my Titan 29 to brushless with an SV motor and ESC. Had been
running an OSE 700 sc and using an X447 prop. What prop should I go to with
the SV motor. Thanks for any help.
Norman2

[Norman2]

Sorry double post

[Jesse J]

what battery config and run time? If only 4S and sport, should be OK with X445, if higher then obviously smaller. I ran mine with the Proboat motor/esc on X445 and 645 on 4S was fine. As always, check temps. Might start smaller just to be safe; it took me several ESCs to realize that this wisdom really is wisdom...

[Norman2]

Titan 29

Hi Jesse J,
Wil be using 2/ 4200 NIMH for now as I have no idea or knowledge of LIPOS.
That will still give me good run time. It was running 41.2 MPH with the 700 sc
but I feel I will go at least 45 MPH. It won most of the races in our club running
LSOffshore and it handles perfect. Just wanted to know if the X447 Octura is the right
prop for Brushless. Maybe I should order that new CMD prop from OSE. It is three
bladed. I could order the same diameter but more pitch. Thanks for your help
Norman2
PS Only need 6-7 minutes run time and our club does not permit LIPO,s on Limited Spec Offshore they have just changed the rules
to permit SV and BJ powerplants.

[Jesse J]

Give it a whirl and post results! Have fun and be glad you have open ponds!