Tweet
Point me in the right direction. RSX 310 SSS 4082 2400kv hydra X on 4S help me with a prop size thinking 42 mm range not sure ?????
-
-
go to the prop calculator and punch in the parameters and figure out a reasonable speed expectation. say 60mph. and find a prop that will give you that.
ose brass 4216 and adjust the timing to suit your expected runtimes/heat.Last edited by Bande1; 08-28-2024, 05:51 PM. -
My GP310 gps at 99kph with a DR Props Nampba 642/3. Depending on water conditions and X445 or 447.NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
2016 SUHA Q Sport Hydro Hi Points Champion.
BOPMPBC Open Mono, Open Electric Champion.Comment
-
For an RSX 310 SSS 4082 2400KV motor with a Hydra X ESC on a 4S setup, a 42mm prop size sounds like a good starting point. However, the ideal prop size can vary based on the specific setup and the type of boat. You may want to start with a 42mm two-blade prop and monitor the motor and ESC temperatures closely. my perfect hotelComment
Comment