2650kv motor on 6s?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tjsb
    Senior Member
    • Mar 2023
    • 321

    #1

    2650kv motor on 6s?

    would this be to much voltage for this 4068 2650 motor.

    Thanks
  • NativePaul
    Greased Weasel
    • Feb 2008
    • 2760

    #2
    Yes, I see that as an awkward middle ground that's a high Kv motor for 4s, or a low Kv motor for 3s.

    For almost all uses its way too high Kv for 6s. You might get away with it for SAWs, but all SAWs setups are a potential fire waiting to happen.
    Paul Upton-Taylor, Greased Weasel Racing.

    Comment

    • LibertyMKiii
      Senior Member
      • Dec 2018
      • 127

      #3
      It will get very hot very quickly. Plus the ESC might cut power based on the amperage being asked of it.

      From my limited experience something around 1600-1800 kv seems to be good for 6s use.

      Comment

      • Gary
        Fast Electric Addict!
        • Jan 2009
        • 1105

        #4
        That's 67,840 rpm on 6s. Nope !!
        PT-45, 109mph, finally gave up after last bad crash
        H&M 1/8 Miss Bud 73 mph
        Chris Craft 16 mph

        Comment

        • tjsb
          Senior Member
          • Mar 2023
          • 321

          #5
          Thanks

          Comment

          Working...