Tweet
Can I get a 4s motor and prop setup
and also a 6s setup
Thanks
and also a 6s setup
Thanks
-
-
double post -
2000kv motor - rocket RC 4074
flycolor 150A
4s 70-75mm total pitch
6s 55-60mm total pitchComment
-
Comment
-
Here's a Mean Machine I built for a customer a while ago - (the MM is 30" but similar to the DF 28) The power is a TP 4050 3y 2100 or 2200 with a T 180/4S2P with a breathed on M545. Bande1 is correct - you can't go wrong with a good 4074 (2000 - 2200 on 4S) & a T-150. Props are like wives - you have to try a few before you get the right one.....
https://forums.offshoreelectrics.com...hmentid=111599
https://forums.offshoreelectrics.com...hmentid=111598Last edited by properchopper; 09-07-2023, 12:25 PM.2008 NAMBA P-Mono & P-Offshore Nat'l 2-Lap Record Holder; '15 P-Cat, P-Ltd Cat 2-Lap
2009/2010 NAMBA P-Sport Hydro Nat'l 2-Lap Record Holder, '13 SCSTA P-Ltd Cat High Points
'11 NAMBA [P-Ltd] : Mono, Offshore, OPC, Sport Hydro; '06 LSO, '12,'13,'14 P Ltd Cat /MonoComment
-
I see you haven’t lost your humour Tony, lolHere's a Mean Machine I built for a customer a while ago - (the MM is 30" but similar to the DF 28) The power is a TP 4050 3y 2100 or 2200 with a T 180/4S2P with a breathed on M545. Bande1 is correct - you can't go wrong with a good 4074 (2000 - 2200 on 4S) & a T-150. Props are like wives - you have to try a few before you get the right one.....
https://forums.offshoreelectrics.com...hmentid=111599
https://forums.offshoreelectrics.com...hmentid=111598Comment
Comment