triton vid......WOW

[hammertime]

http://www.youtube.com/watch?v=s5sYEkZdcoQ

[Piranha2]

sick speed......thanks for the teaser

[Doug Smock]

Don't try that at home

That's a good example of how NOT to set up a 33"hull.
That hull and motor is better suited for 4s. Hopefully he will get real before he breaks the boat or lets the smoke out.:rolleyes:

[hammertime]

look at this too

http://www.youtube.com/watch?v=CnyFteQO41U

[Jeepers]

how many cells? what motor, in that triton?

[Doug Smock]

how many cells? what motor, in that triton?

Hey Jeepers,
He is running a 2240-8 (1850 kv) on 6s1p.
That is a SAWs set up.

Doug

[saleens7]

he getting 41,000 free rpms on that thing

that should be in a cat or hydro or a rigger, not a vee

[SJFE]

It should be in somthing about 10 inches longer.

[hammertime]

agreed lol

[Doug Smock]

To give you an idea,

We are putting 2200kv motors on 33" hulls on 4s1p and pulling 108 amps in the straights. That is a pretty hot setup by most peoples standards and we have more power that we can put on the water.

Doug

[Doug Smock]

It should be in somthing about 10 inches longer.

It's too hot for oval or sport running, but I think you could get by with that in a 38" mono in SAWs.
We'll know before fall.

Doug

[Steven Vaccaro]

Cool find. A bit over powered I would have to say.

I built a couple of tritons with Lehner 2250/10 turns. They were rockets on 18 cells and high pitch props.

[hammertime]

all i know is that thing screams too bad it wont settle down