Neu motors case Dia

[Punisher 67]

Can anyone give me a case diameter for a Neu 1512 , 1515 and the 1521 , 1527 non finned motors with a digital micrometer

thank you...........................

[AntronX]

My 1515 1.5Y = 1.537" using 0.001" precision analog scale caliper.

[Ub Hauled]

Peter, chk it out here... I think they have th info you need...

http://www.flydma.com/index.php?cPath=1_2

[Punisher 67]

Thanks for the measurement Antron

Jan thanks for this site . they have the 1512,1515 and the 1521,1527 with the same case sizes , I have heard that the bigger two have a slightly larger case . I have a 1527 but I re-machined the case so my measurement would be off

[Ub Hauled]

you are correct, I have heard the same, had I a decent caliper I'd measure the 1527, 1521 and the 1512 for ya, bu my caliper is crap.

[detox]

My 1515 1.5Y = 1.537" using 0.001" precision analog scale caliper.

My 1515 1Y Measures 1.537" using 0.001 precision analog scale caliper.

[Eyekandyboats]

Originally Posted by AntronX View Post
My 1515 1.5Y = 1.537" using 0.001" precision analog scale caliper.

My 1515 1Y Measures 1.537" using 0.001 precision analog scale caliper.

My 1515 .5Y = 1.537" using 0.001" precision analog scale caliper.

[AntronX]

My 1515 .5Y = 1.537" using 0.001" precision analog scale caliper.

Did you guys copy and paste my comment?

[Eyekandyboats]

oh most defiantly. is there a prob;em with that
however i changed the wind on mine as well as DETOX did.
i have a .5 y and detox has a 1.5 y and you have a 1y

[detox]

Detox has a 1Y/S and a 1.5Y/S ... They both measure 1.537"...HA HA

[Eyekandyboats]

eyekandyboats has a 1Y/S and a 1.5Y/S and a 2 Y/S and a.5Y/S ... They all measure 1.537"...HA HA

Detox has a 1Y/S and a 1.5Y/S ... They both measure 1.537"...HA HA

[icelert]

1521/1D/S/8mm
DOM 12/16/08

1.577" measured with a Starrett 1-2" OD mike
1.612-1.618" dia measured at set screws near endbell

Bryan