Rudder help.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Thegreengiant12
    Member
    • Oct 2020
    • 68

    #1

    Rudder help.

    How do I fix the linkage for the steering if the rod wont line up with the hole for the rudder?




    Edit. Just thought about it would this work if I bent the pushrod like this design?

    https://imgur.com/gallery/MEmFvwg
    Last edited by Thegreengiant12; 01-30-2021, 05:43 PM.
  • 1coopgt
    Senior Member
    • Feb 2019
    • 413

    #2
    Link for the second picture isn't working.

    Comment

    • Thegreengiant12
      Member
      • Oct 2020
      • 68

      #3
      Originally posted by 1coopgt
      Link for the second picture isn't working.
      So I tried bending the pushrod to fit and it worked for one directing of turning but when I go the other direction the pushrod rubs up against the grommet inside and sort of binds. Would it be hard to relocate the hole for the grommet for the pushrod to go through say if I moved it closer to the rudder bracket. Is the grommet usually threaded on through the hull?

      Comment

      • 1coopgt
        Senior Member
        • Feb 2019
        • 413

        #4
        Is it a Plastic or Fiberglass hull?

        Comment

        • Thegreengiant12
          Member
          • Oct 2020
          • 68

          #5
          Originally posted by 1coopgt
          Is it a Plastic or Fiberglass hull?
          Its a fiberglass hull.

          Comment

          Working...