Reducing hull length of Blazer .21 Whip lash hydro for a mini bl hydro !

[Andris Golts]

Hi all bought a Blazer .21 hydro kit a decade ago for .21 nitro was thinking of tracing templates and reducing them to give me a 19 inch mini hull the one thing i noticed sponson depth would only work out to about 5/16 of and inch and there is also a belly pan in hull design would this work for f.e i am thinking on a 28 x 35 3500 kv outrunner on 3s for power! HAS anyone ever reduced one of these hulls for this purpose and would it work! Regards Andris Golts.

[NativePaul]

Because we can't scale down the water conditions, generally I deviate from scale and increase the water clearance as I go smaller with our hulls.

Having said that if you don't mind limiting yourself to only running on glass, 5/16 will be fine. Even on glass I wouldn't get the belly pan less than 1/8" off the water though.