H&M No step 4

[vvviivvv]

Anybody experienced with this hull?

Just picked a complete one up built with a Tp5850 1000kv, Mbp-rc 300 amp esc designed around 10s...
Sufficient reinforcement in the hull also


I also have a Lehner 3060/6 1167KV which im going to drop in... its only marginally longer and wider than the Tp5850

the boat ran about 65mph on a 5850, i guess with 10s on the 3060 it will be closer to 70 with a Prather S235 which is what its currently running...?

I don't know much about the MBP esc, would i be safe to prop up to a s240? probably wont need too?

Should fly...

[785boats]

I ran one back in 2012 when I was a bit of a rookie at this FE game.
Here's a link to a thread, if it is of any help.
It shows a few pics & videos. Also the a couple of problems, along with the fun.

https://www.rcgroups.com/forums/show...Step-4-36-mono

Cheers.

[vvviivvv]

Hi, i did actually find that thread and give it a read... some of the info i was looking at is blocked / lost but...

Ill be home in a few weeks to start tinkering on with it and getting it going... i do have a lot of power installed for the size of boat so could be some interesting results, it is suitably reinforced...