HiModel 4s-8s 200 amp esc

[Alfa Spirit]

May be this is a stupid question...

When the ESC is waterproof with silicone like mine, is there a problem to listen the "bips" for setup the ESC?

Thanks

[ozzie-crawl]

the beep comes from the motor not the esc as such

[Alfa Spirit]

Ouf !! Thanks Ozzie

Do you think that those two ESC are the same?

[bustitup]

And the only differance in the 2 that I can see is that the one you are looking at they have put 2 brass tubes on the heat sink to run water through

yes but i meant its the first mystery 200 amp that I have seen for sale that comes water cooled

[bustitup]

You bought Mystery from ebay or HiModel GX 200?

Here is user' s manual for the 200A 3-7S Brushless Electric Speed Controller

http://www.himodel.com/en/rc_manuals_url.php?id=130

I was saying I just bought two of those mysterys from that vendor on ebay that you posted the picture of because I wanted two of the exact same mysteries to put in my twin Maritimo


but i have bought the 8s himodel off there site and water cooled it and ended up selling it to someone in the swap shop and they say its working fine no problems

[bustitup]

I hate trying to program with beeps...I am not going to even program mine...I will just run it with all the defaults...I will be running them on 6s..do you think there will be a problem running on all default?

[BakedMopar]

Does the Mystery's have an auto setting for the Lipo cutoff? I am unsure of this but I think you have to change it manually for different cell counts.

[bustitup]

That's what I am saying.......if you read the specs it says auto detect lipos......and I am pretty sure auto detect is the default setting from the factory

Does the Mystery's have an auto setting for the Lipo cutoff? I am unsure of this but I think you have to change it manually for different cell counts.

[BakedMopar]

That's what I am saying.......if you read the specs it says auto detect lipos......and I am pretty sure auto detect is the default setting from the factory

Yes I know thats what the description says but if you look at the pictures close it also says 16.8v max.

I know on the description for the 80 amp ones say auto Lipo detect but the manuals found online says you have to manually program for different battieries.


But then again I really don't know much about these as I just got mines.

[ozzie-crawl]

i never worry about programing mine but then i never have run my boats till the lvc cuts in
i have run a mystery in a 1/8 serpent i converted to brushless and the lvc worked on that running 6s, thats the only time i have gotten battries low enough for it to work

[Brushless55]

Ouf !! Thanks Ozzie

Do you think that those two ESC are the same?

they are the same esc..
I have 3 of the 200A escs
and one 100A
mine say sky-wing and have bec

[bustitup]

i never worry about programing mine but then i never have run my boats till the lvc cuts in
i have run a mystery in a 1/8 serpent i converted to brushless and the lvc worked on that running 6s, thats the only time i have gotten battries low enough for it to work

sweet..thats what i wanted to hear

[Brushless55]

yep they work right out of the box just fine..

[BakedMopar]

Nice to know.

[bustitup]

Nice to know.

if you do want insurance ....I may add a couple "lipo sheild" for about 20 bucks