stuff for my whiplash!

[Bill Gibson]

Im at a point where I need to start laying out stuff in the hull, but don't know what to get and where to get it.........I need a
steering servo
rudder assy
strut assy
turn fin
motor mount
coupler
3/16 flex shaft......for a P hydro!
I guess that would be a good start! Thanks, Bill

[MadProps]

https://www.offshoreelectrics.com/

[HTVboats]

Bill,
Other than the motor mount and coupler the rest of the hardware would match what a .21 sport Hydro uses. 3/16 (.187) cable for sure in anything above P/ltd. I think I gained maybe 1/2mph going to a .150 cable in my Cat and it broke adding a larger motor which you will do in your whip eventually. Look at mounts on OSE and their 5mm to .187 couple has held up for me with some larger Q boats. Never slipped. The WP servo on OSE is very strong and reasonable.
Mic

[Bill Gibson]

Bill,
Other than the motor mount and coupler the rest of the hardware would match what a .21 sport Hydro uses. 3/16 (.187) cable for sure in anything above P/ltd. I think I gained maybe 1/2mph going to a .150 cable in my Cat and it broke adding a larger motor which you will do in your whip eventually. Look at mounts on OSE and their 5mm to .187 couple has held up for me with some larger Q boats. Never slipped. The WP servo on OSE is very strong and reasonable.
Mic

Thanks Mic! I have lost your phone#......again!!