Tweet
I recently setup the hydro and tested it out yesterday. When the boat gets to top speed sometimes it lifts the right sponson. I haven't put on a turn fin yet just to see how she ran. It turns wonderfully and I want to get her to run in the straights like my viper hydro.
Setup is as follows :
4s 4100mah
Feigao 10xl
Hydra 120
Octura x440 s&b
C.G. 1" behind sponson transom
Solinger Hydro Hardware
Strut Set at Neutral Angle
Strut Height 1/8" From Transom
Thanks Tracy!
Setup is as follows :
4s 4100mah
Feigao 10xl
Hydra 120
Octura x440 s&b
C.G. 1" behind sponson transom
Solinger Hydro Hardware
Strut Set at Neutral Angle
Strut Height 1/8" From Transom
Thanks Tracy!