What diameter prop size should i start with for 6s mono ?

[Andris Golts]

Hi all i have a 32'' Finch Wild thing hull and hardware weight at 60 oz i have a Leopard 4082 1600 kv motor a Swordfish 220 amp esc c/w anti spark lead installed and have a pair of Turnigy blue 3s 5000 mah 50 c lipos connected in series for a 6s 1p lipo power system. What minmum size prop i should be starting with and what would be maximum diameter prop could i run? I will also keep close watch on my run times as i have no room inside of hull for a pair of 6s lipo,s. Regards Andris Golts.

[StevenBryant]

Hi all i have a 32'' Finch Wild thing hull and hardware weight at 60 oz i have a Leopard 4082 1600 kv motor a Swordfish 220 amp esc c/w anti spark lead installed and have a pair of Turnigy blue 3s 5000 mah 50 c lipos connected in series for a 6s 1p lipo power system. What minmum size prop i should be starting with and what would be maximum diameter prop could i run? I will also keep close watch on my run times as i have no room inside of hull for a pair of 6s lipo,s. Regards Andris Golts.

I use M445, M545 and M457 on my DF31 with the same motor/esc and cell combo


Sent from my iPhone using Tapatalk

[MadProps]

Im running an octura x447 on a Pursuit with same motor

[rol243]

Its wise to always start with a smaller prop then work up from there after heat checks. i would start with the 445 x 2 blade.

[Andris Golts]

Thanks to all for the great information . Regards Andris Golts