Aveox and Hackar motors

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • old guy
    Senior Member
    • Nov 2008
    • 687
    #1

    Aveox and Hackar motors

    I just found these in a box of my RC stuff I got them in a trade awhile back

    1st is a Aveox 36/30/1.5 1980 Rpm/v Io 3.9, 60/100/40A Bla bla bla bla

    2nd is a Hackar HBR B50 8L 3019 u/v not so many bla bla on this one

    3rd is a Hackar B-50-8s 4613 RPM/V

    so becouse I know nothing about FL what do I have and what can I put them in and how many cells will they take? is one of these any good for a rigger and if so how many cells?

    36/30/1.5 what does that meanand what about the 60/100/40A on the same motor

    Thanks for the Help
    Old Guy in the woods
    Tags: None
    • Darin Jordan
      Fast Electric Addict!
      • Apr 2007
      • 8335
      #2
      Originally posted by old guy
      1st is a Aveox 36/30/1.5 1980 Rpm/v Io 3.9, 60/100/40A Bla bla bla bla
      Not sure about this one... Sounds like a smallish motor that might run well on 3S to 4S Lipos??


      Originally posted by old guy
      2nd is a Hackar HBR B50 8L 3019 u/v not so many bla bla on this one
      That is an excellent 8-cell motor that used to win a lot of O-Sport and O-Mono races... Would be a good Mono motor on 2S Lipos for offshore or sport running... about 25,000 RPM or so... Or a screamer on 3S Lipos at around 36,000 RPM...

      Originally posted by old guy

      3rd is a Hackar B-50-8s 4613 RPM/V
      That's a hot motor on 2S... and a little smallish... Maybe a smaller 2S Rigger or light sport Hydro?? You are looking at around 36,000 again, only on 2S this time, so more amps...

      Would be a good 6 or 7-cell small sport hydro motor as well... if it's light and aired out...
      Last edited by Darin Jordan; 11-14-2008, 06:35 PM.
      Darin E. Jordan - Renton, WA
      "Self-proclaimed skill-less leader in the hobby."

        Comment

        • old guy
          Senior Member
          • Nov 2008
          • 687
          #3
          Thanks the Aveox is about 3/32" wider than the B50 8L and about 3/16" longer
          If this helps any one
          would this be a good cheep ESC for the motors I would like to go cheep untill I know more It's not so bad when you smoke a cheep one?
          HiModel GX Seires 200A 3-7S Brushless Electric Speed Controller Type GX-200A-OPTO | HiModel
          http://www.himodel.com/electric/HiModel_GX_Seires_200A_3-7S_Brushless_Electric_Speed_Controller_Type_GX-200A-OPTO.html#
          HiModel GX Seires 200A 3-7S Brushless Electric Speed Controller Type GX-200A-OPTO from manufacturer HiModel, in category Brushless Speed Control (BL ESC) - Air/ Helis, Electric Speed Control (ESC).

          does Feigao or any one make a cheep motor the size of a Neu 1515/1Y/S
          old Guy
          Last edited by old guy; 11-14-2008, 06:54 PM.

            Comment

            • Dr. Jet
              Fast Electric Addict!
              • Sep 2007
              • 1707
              #4
              That Aveox motor is the forerunner of the Neu 1512 motors. The 4-pole rotors are interchangeable. That is a great motor for 4S applications. It has a ton of torque and it is nearly (but not completely) as efficient as the Neu. Any cheap Chinese ESC capable of 80~120 amps would be fine for that motor in a “sport” setup. It is better (in my opinion) than most 2-pole motors currently available.
              A nation of sheep breeds a government of wolves

                Comment

                • old guy
                  Senior Member
                  • Nov 2008
                  • 687
                  #5
                  Made a mistake I should have said does Feigao or any one make a cheep motor the size of a Neu 1521 1D
                  Old Guy

                    Comment

                    Previous template Next
                    Working...