MTC drive systems

[nmnorth]

I’m trying to get parts , mainly flex shafts ,3/16 very special ,
Keith Bradley and Model Lbaucenter Lorenz in Germany are the only suppliers for these and I get no response from them , can anyone help me on this ?? Bill

[dmitry100]

Can you take a picture or describe what you are looking for?

There should be 2-3 other alternative places you can order from that make similar hardware

[dmitry100]

Anyway, I would look here:

http://hydromarine.de/

https://www.rc-raceboats-shop.de/

http://gundert.de = translated site: https://translate.google.com/transla...F%2Fgundert.de

https://mbp-rc.de/

All above except gundert.de have english versions of their sites (look for and click on USA flag on top of the pages)

[nmnorth]

its a 3/16 flex shaft , steps up to around 5.9mm smooth stub shaft for about 1 3/4 long then steps down to 3/16 threaded for nut

[nmnorth]

none of those will work , I need mtc why you suppose model lbaucenter Lorenz doesn't respond?? they sell this drive

[dmitry100]

Are you sure you sent email to correct address?
Email: [email protected]

Also, Have you tried making a direct order on their shopping site?

https://www.modellbaucenterlorenz.de/en/

That sounds like a typical 6mm shaft with 3/16 prop and flex tho
I run the same kind on both of my catamarans

Do you need a really short shaft or something?
Here is what I found on Hydromarine.de :

https://www.hydromarine.de/Flex-Hard-Shaftsystems/Flex-systems-spareparts/Ersatzflexwelle-4-7-mit-6-mm-Welle-und-4-7-DD::1450.html

[nmnorth]

Yes , I tried those web sites , no response , maybe they are on vacation , anyway I didn’t realize those shafts are 2 piece system , I got some help on that so I think I should be good to go , thanks for all your help , Bill