Miter gears for outboards and outdrives

[ScarabChris]

These look like the ones that would be used in drives like the Graupner Z-820 and possibly the AMPS drives.

https://www.ebay.com/itm/BOSTON-GEAR-BRASS-G-462-Y-90-DEGREE-MITER-GEARS-PAIR-FOR-CLOCKS-HOBBY-RAILROAD-/232435424389

[ScarabChris]

And if my measurements are correct, which should be pretty straight forward, this is the gear for the Aquacraft EP1 outboard. Just trying to find a vendor easier to buy from.

https://www.aliexpress.com/item/2PCS-0-8M15T-Bevel-Gear-0-8-Mod-M-0-8-Modulus-Ratio-1-1-Bore/32796994454.html?spm=2114.search0104.3.144.nFvoZW&ws_ab_test=searchweb0_0,searchweb201602_1_10152_10065_10151_10130_10068_10344_10345_10547_10342_10546_10343_10340_5620011_10341_10548_10545_10541_10307_10060_10155_5640011_10154_5370011_10056_10055_10539_10538_10537_10536_10059_10534_10533_100031_10103_10102_10142_10107_10324_10325_10084_10083_10178_10312_10313_10314_10073_5720011_5630011,searchweb201603_24,ppcSwitch_5&btsid=d902beb6-f62c-4e26-b7b7-3c5d5da8cd71&algo_expid=0caaed63-2017-4935-9ab6-ed9c9e8d8d5b-19&algo_pvid=0caaed63-2017-4935-9ab6-ed9c9e8d8d5b