All I get is a beep every second from my SSS motor
Collapse
X
-
Tony a working receiver is tested and in the mail to you
here is a video for binding to your Tx follow my instructions not the manufacturers or THIS receiver wont bind to your TX
Comment
-
Thanks to everyone with the assistance. Newboater got me squared away earlier today. I'm gtg. MadProps, thanks for the receiver, I told NB today that I will be forwarding your unit to him next time we meet, just to keep things square. We also set up my Turnigy ESC with NB's Hobbywing ESC Card, so I'm all set. I tried my HW Card running through the wire coming off the ESC, but ng. When I used the plug/wire from his card, I was able to use my HW Card to program the Turnegy 180a ESC. Weird. Thanks again gentlemen. Stupid hobbyLast edited by Linewbie; 07-27-2017, 08:19 PM.Comment
-
Thanks to everyone with the assistance. Newboater got me squared away earlier today. I'm gtg. MadProps, thanks for the receiver, I told NB today that I will be forwarding your unit to him next time we meet, just to keep things square. We also set up my Turnigy ESC with NB's Hobbywing ESC Card, so I'm all set. I tried my HW Card running through the wire coming off the ESC, but ng. When I used the plug/wire from his card, I was able to use my HW Card to program the Turnegy 180a ESC. Weird. Thanks again gentlemen. Stupid hobbyComment
-
Tony the 2 troublesome receivers arrived and were as I suspected ...buggered ...they will not bind to the Tx they were intended for once the bind plug is installed in wrong place
they did bind to the older Tx I have here just as my Rx's did
pay attention people with flysky binding procedures or you will wish you had!Comment
Comment