A little help with an idea

[JimClark]

I am trying to finish up this boat so I can deliver it to it's new owner. I just am not coming up with any good ideas as how to keep the 2s batteries in place. I found a great place for them tucked away under the deck out of the way. Anyone got any good ideas? I am thinking about a foam (pool noodle ) wedge to keep them from bouncing up and down but I also need to hold them in place from moving side to side.

[Bigford]

What about a small square of velcro

[MadProps]

epoxy a velcro strap under them

[MadProps]

ha we both posted almost the same time similar answer, easiest answer is usually the best

[srislash]

I've been going with the foam thing Jim, perhaps a piece under that deck area and then one that drops in between the rails. I assume there is a pack going on each side.
Square foam comes as packing for a lot of items or I could send you a piece if you are not in a rush.

Shawn

[jantagg]

Glue a piece of wood in front. Along the side velcro a piece of wood long the side of the pack. Then all you have to do to remove the pack is lift the wooden piece and slide the pack out.

[dasboata]

Velcro
and pool noodles!!!

[kfxguy]

Velcro to the outer wall and side of the battery.

[Shooter]

Jim,

That's a tough one. "Pure-Tech" sells velcro straps that can be glued in place. The battery would slip in, then pull the strap over to lock in place. Just a thought.