41" Zonda Carbon Fiber Catamaran New V3

[slider46]

You should ditch those battery connectors for 5.5 bullets or 6's... they will melt down if you make long hi speed runs..

[Revolt Flash]

Easy guys, Second pic on right on the board and third pic on orange towel is the 5 inch dual water rudder. Connectors will be going to. The pics were when it just came out of the box. But she is now in the water and running cool.

[Keagan-Z06]

Very Nice Revolt!

[Revolt Flash]

Keagan-Z06, Have you run it yet with the 240 and TP 4050's?

[Keagan-Z06]

Not yet, I'm waiting on the castle link for programming. The trigger method based on the manual is way too intimidating compared to my T180s. If you need help srislash is my go to guy with this hull. Very knowledgeable guy!

IMG_0136.jpg

[Revolt Flash]

Thanks, I'll keep that in mind. I also run a CC HYDRA ICE 240 and use the castle link for programming on my Voracity. I love it man. The data it gives out is great for tuning.

[srislash]

Thanks, I'll keep that in mind. I also run a CC HYDRA ICE 240 and use the castle link for programming on my Voracity. I love it man. The data it gives out is great for tuning.

One heck of a great help in learning for sure.

[Revolt Flash]

Has anybody tried running the Kintec KR Dual Cooling Rudder Bracket on the Zonda in place of the dual rudder pickup.

[Keagan-Z06]

That's what I'm using.

[Revolt Flash]

Thanks for the reply. Going to get one too.

[Zondar]

I'd like to jump in here as my rig is a Zonda-R from RCBB. It came with their custom ESCs rated at 200. I have been running 6s and would welcome opinions on comparable ESCs. Motors are 2075KV/ SSS I believe.

[Revolt Flash]

Our Zonda runs a pair of Seaking 120's with the 2075KV motors. Just switched out the props to a set of 3 blade 45's.