Tweaking Miss Geico 29 v3

[JimClark]

look on OSE store

[fweasel]

You'll need a bigger motor collet to run a .187 flex in that boat. The upgraded .150 flex cable will work with the stock collet, but its a good time to upgrade to a better stainless collet anyways. I've cracked more than one of the cheap stock versions and some of them tend to bottom out against themselves before getting fully tight. I ran the upgraded .150 cable on 6S with a stock motor, no issues. The .187 is recommended for larger motors.

http://www.offshoreelectrics.com/pro...s+%26+Upgrades

[Erroneous]

^ Yup. The only cables Ive had trouble with where the stock cables. Did just go .187 Though.