Tweet
I have 3 boats that I can not get going.One is a supervee,another is a blackjack and a genesis that I am twinning.The vee needs new esc I think.The Genesis has twin 3674 leopards in it and two Turnigy 90amp esc.When I try to arm all three I get rudder control but no throttle control at all.I use the Flysky rx and tx and I can use one for all,All I have to do is bind them when I want to change boats .So I have been trying to figure out the problem but no luck.Hopefully someone out there might have a clue as to what it could. Thanks in advance...............
-
-
It could be throttle calibration. Or throttle reversing. -
Are you using a separate reciever for each boat?NEVER SATISFIED RACING
Fine Design 32 V-Hull 4082+6sComment
-
I will be checking that out later today,thanks for the info.Comment
-
Yes I am,I am using the flysky system which allows me to use 1 tx for all.Just have to bind them and away you go.That way ya dont have to lug around a few transmitters.One person pointed out that the Tx might need to be calibrate it.Doing my testing later today and will let you all know the results.Comment
Comment