Tweet
I have some Jg props from back in my nitro days, and have got back into rc boating recently (going electric), and was wondering if anybody has a conversion from jg to octura.
-
-
This is what I have in JG props.
On the Left is about the Octura equivalent. Some may have a larger or smaller blade area.
Also to the right of center is the Pitch ratio.
LarryPast NAMBA- P Mono -1 Mile Race Record holder
Past NAMBA- P Sport -1 Mile Race Record holder
Bump & Grind Racing Props -We Like Em Smooth & Wet -
Thanks Larry for the info. I did some research and found out about the same info as you did. i am going to take my Genesis cat hull out for its maiden voyage today and wanted to get an opinion to see if my setup is close or not. Leopard 2200kv , 6s 60-120c , 220A swordfish , Octura 642 . Im thinking the prop is a little small , but don't want to burn it up like i did my last combo due to too big of prop. I have JG RH-25 , RH-27 , and RI-25 as alternate . Any advise ? Blade area looks to be really big on the JG props .Last edited by Hotrod Guy; 05-15-2016, 12:47 PM.Comment
-
For your combo X447 is a good prop...take care small props also burn esc due to overev! GillGO FAST AND TURN RIGHT !
www.grsboats.com.brComment
Comment