Problem with my little FT009 rc boat, please help!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • boilo56
    Senior Member
    • Aug 2014
    • 390

    #1

    Problem with my little FT009 rc boat, please help!

    Hi everyone, i bought a FT009 boat for my sister's son. I tried testing it, and it doesn't work. I've searched on youtube, and found this video that is showing the same problem i have.https://youtu.be/E18bS8ZWE8w i bought the boat this winter, so waranty is over. Please help me!

    Thank you
  • Peter A
    Fast Electric Addict!
    • Sep 2012
    • 1486

    #2
    Some of these have a switch so that they only work when they are in water. Try putting it in the bath and testing.
    NZMPBA 2013, 2016 Open Electric Champion. NZMPBA 2016 P Offshore Champion.
    2016 SUHA Q Sport Hydro Hi Points Champion.
    BOPMPBC Open Mono, Open Electric Champion.

    Comment

    • TRUCKPULL
      Fast Electric Addict!
      • Apr 2007
      • 2971

      #3
      Originally posted by boilo56
      Hi everyone, i bought a FT009 boat for my sister's son. I tried testing it, and it doesn't work. I've searched on youtube, and found this video that is showing the same problem i have.https://youtu.be/E18bS8ZWE8w i bought the boat this winter, so waranty is over. Please help me!

      Thank you
      You can bind the radio on land.
      The motor will not work unless the boat is in the water.
      There are a pair of contacts under the hull. They must be shorted out as when the boat is in the water.
      this is suppose to be a safety feature.

      Larry
      Past NAMBA- P Mono -1 Mile Race Record holder
      Past NAMBA- P Sport -1 Mile Race Record holder
      Bump & Grind Racing Props -We Like Em Smooth & Wet

      Comment

      • boilo56
        Senior Member
        • Aug 2014
        • 390

        #4
        i did it, the light in the receiver box is flashing... the rudder moves a little when i put it in water, but nothing after that. the vid i posted shows exactly my problem. The boat in the video as been mod to bypass the in-water protection.

        Comment

        • boilo56
          Senior Member
          • Aug 2014
          • 390

          #5
          Ok,i managed to bind the boat and tx. Now the motor is working, but not the steering. The trim works fine, but not the steering wheel. Any ideas on what is happening?

          Comment

          • Tamelesstgr
            Fast Electric Addict!
            • Jun 2014
            • 1516

            #6
            Do you know if the battery is good? Fully charged balanced cells?
            NEVER SATISFIED RACING
            Fine Design 32 V-Hull 4082+6s

            Comment

            • boilo56
              Senior Member
              • Aug 2014
              • 390

              #7
              Yes, the battery is ok. 2S at 4.18v per cell.

              Comment

              • boilo56
                Senior Member
                • Aug 2014
                • 390

                #8
                I found the problem!!! The problem was a bad contact in the Steering switch, in the tx. I just changed the 3 wires and everything work just fine!!!

                Comment

                Working...