Hydra 240

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • electric
    Fast Electric Addict!
    • May 2008
    • 1744

    #1

    Hydra 240

    What would be a good voltage cut off for a 4s set up? When I look at the options on the Castle software it has...4, 6, 7.2 9 and 12. and custom volts. Since I am running two 2s packs for a total of 14.4 volts would it be 12 volts? I had heard 3 volts per cell and there are 4 cells giving 12 volts? Is this correct??? I will be running a Hydra 240 with a 6xl motor on a triton.
    Last edited by electric; 08-24-2008, 08:56 PM.
  • Raydee
    Fast Electric Addict!
    • May 2007
    • 1603

    #2
    13.2 Volts is where all my 4s boats are set for the cutoff. I haven't hit the cuttoff yet.....then again I really never tried.
    Team Liquid Dash

    Comment

    • andym
      More Go Than Show Prop Co
      • Apr 2007
      • 2406

      #3
      I'm with Raydee, 3.2 volts per cell works for me.

      Comment

      • electric
        Fast Electric Addict!
        • May 2008
        • 1744

        #4
        Thanks. So I gather I just go to the custom setting and do it there. I will give it a try.

        Comment

        • electric
          Fast Electric Addict!
          • May 2008
          • 1744

          #5
          Got it set up. Thanks again.

          Comment

          • Raydee
            Fast Electric Addict!
            • May 2007
            • 1603

            #6
            Have fun, just remember to under prop the first couple runs and check the temps a lot.
            Team Liquid Dash

            Comment

            Working...